Precision incubator Model IF750
ตู้เลี้ยงเชื้อ / ตู้เพาะเชื้อ / ตู้บ่มเชื้อ IF750
Standard delivery Precision incubator Model IF750
The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.
ตู้เลี้ยงเชื้อ / ตู้เพาะเชื้อ / ตู้บ่มเชื้อ IF750
On this page, you can find all the essential technical data on our incubator. Our customer relations team
will be pleased to help if you want further information. If you should require a customised special solution, please contact us.
Ventilation and Control Precision Incubator Model IF750
- forced air circulation by quite air turbine, adjustable in 10% steps for each segment individually
- adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment individually
- vent connection with restrictor flap
- adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
- self-diagnostics for fault analysis
- 1 Pt100 sensors Class A in 4-wire-circuit
- digital timer adjustable from 1 minute to 99 days, 23 hours
- parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
- SetpointWAIT function - the process time does not start until the set temperature is reached
- resolution of display for setpoint and actual temperature values 0.1°C
- calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
- programme stored in case of power failure
- incl. works calibration certificate for 37°C
Overtemperature Protection (double) Incubator Model IF750
- adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12 880 to switch off the heating approx. 20°C above nominal temperature
Textured Stainless Steel Casting Incubator Model IF750
- w x h x d: 1224 x 1247 x 784 mm
- fully insulated stainless sะeel door with 2-point locking (compression door lock)
- inner glass doors
- rear zinc-plated steel
Interior - Heating Concept Incubator Model IF750
- w x h x d: 1040 x 1200 x 600 mm, 749 l
- easy-to-cle10n interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
- 2 stainless steel grids
- Max. loading of chamber: 300 kg
Temperature Range Incubator Model IF750
- min. 10 °C above ambient up to +80 °C
Voltage / Power Rating Incubator Model IF750
- 230 V (+/- 10%), 50/60 Hz / approx. 2,000 W
- 115 V (+/- 10%), 50/60 Hz / approx. 1,800 W
Packing Data Incubator Model IF750
- net weight approx. 217 kg
- gross weight carton approx. 292 kg
- dimensions approx.:
carton w x h x d: 133 x 192 x 105 cm
- the appliances must be transported upright
Customer Tariff Number Incubator Model IF750
Country of Origin Incubator Model IF750
- Federal Republic of Germany
WEEE-Req.-No. Incubator Model IF750
Precision incubator Model IF750 Specification
คุณสมบัติ ตู้เลี้ยงเชื้อ / ตู้เพาะเชื้อ / ตู้บ่มเชื้อ IF750
ขนาดบรรจุ 749 ลิตร แบบมีพัดลมภายใน
1. เป็นตู้บ่มเชื้อที่ทำด้วยโลหะสแตนเลสสตีลทั้งภายในและภายนอก โดยมีแผ่นภายนอกด้านหลังทำด้วยเหล็ก เคลือบกันสนิม
2. สามารถควบคุมอุณหภูมิได้ตั้งแต่ 10 องศาเซลเซียส เหนืออุณหภูมิห้องถึง 80 องศาเซลเซียส มีความละเอียดในการปรับตั้งได้ 0.1 องศาเซลเซียส
3. ตู้บ่มเชื้อมีขนาดความจุประมาณ 749 ลิตร โดยมีขนาดช่องเลี้ยงเชื้อ กว้างxสูงxลึก 104x120x60 เซนติเมตร
4. ระบบควบคุมอุณหภูมิเป็นแบบ PID microprocessor controller ประตูตู้เปิด-ปิดชนิดบานคู่พร้อมล้อเลื่อน
5. มีระบบป้องกันอันตรายจากอุณหภูมิเกินแบบปรับตั้งได้เป็นตัวเลขและมีสัญลักษณ์แสดงกรณีเครื่องเกิดปัญหา
6. มีประตูตู้ 2 ชั้น ชั้นนอกเป็นโลหะสแตนเลส ชั้นในเป็นกระจกใส
7. ควบคุมการทำงานเครื่องโดยระบบสัมผัส ด้านหน้าเครื่อง
8. ผนังภายในตู้มีครีบ (Support ribs) เพื่อเป็นที่วางชั้น สามารถวางชั้นได้ถึง 14 ชั้น
9 มีชั้นวางของทำด้วยสแตนเลสสตีล จำนวน 2 ชั้น ถอดเข้า-ออก และสามารถปรับระดับสูง-ต่ำ
10 เครื่องบ่มเชื้อนี้สามารถตั้งเวลาในการทำงานได้ พร้อมช่องระบายอากาศสามารถปรับได้ควบคุมการเปิดปิดด้วยมอเตอร์
11. ใช้ไฟฟ้า 220 โวลท์ 1 เฟส
12. เครื่องบ่มเชื้อนี้เป็นผลิตภัณฑ์ที่ผลิตจากประเทศเยอรมันนี
13. รับประกันคุณภาพ 1 ปี
14. ได้รับมาตรฐาน ISO9001
Download Incubator 32 Models specification
ดาวน์โหลด รายละเอียดตู้เลี้ยงเชื้อ/ตู้เพาะเชื้อ/ตู้บ่มเชื้อทั้ง 32 รุ่น
ตู้อบลมร้อนอุตสาหกรรม
ตู้อบลมร้อนระบบแก๊ส ตู้อบแห้ง มาตราฐาน
|
ตู้อบลมร้อนระบบแก๊ส มาตรฐาน มีคุณสมบัติในการอบชิ้นงาน เพื่อไล่ความชื้นออก สามารถเก็บรักษาวัตถุดิบไว้ได้นาน หรือเพื่อการแปรรูปผลผลิตต่าง ๆ พร้อมด้วยระบบควบคุมอุณหภูมิภายในตู้อบ บุด้วยฉนวนกันความร้อนอย่างดี ถาดแสตนเลสมีความแข็งแรงเป็นพิเศษ สามารถตั้งเวลาในการทำงานได้
|
ตู้อบลมร้อนระบบแก๊ส ตู้อบแห้ง อินฟราเรด
|
ตู้อบลมร้อนระบบแก๊ส อินฟราเรด มีคุณสมบัติในการอบชิ้นงาน เพื่อไล่ความชื้นออก สามารถเก็บรักษาวัตถุดิบไว้ได้นาน หรือเพื่อการแปรรูปผลผลิตต่าง ๆ พร้อมด้วยระบบควบคุมอุณหภูมิภายในตู้อบ บุด้วยฉนวนกันความร้อนอย่างดี ถาดแสตนเลสมีความแข็งแรงเป็นพิเศษ สามารถตั้งเวลาในการทำงานได้
|