Precision incubator Model IN160
ตู้เลี้ยงเชื้อ / ตู้เพาะเชื้อ / ตู้บ่มเชื้อ IN160
Standard delivery Precision incubator Model IN160
The heating of this incubator is optimally tuned for both natural convection and forced air circulation; the fan can also be switched off completely, and valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully.


ตู้เลี้ยงเชื้อ / ตู้เพาะเชื้อ / ตู้บ่มเชื้อ IN160
On this page, you can find all the essential technical data on our incubator. Our customer relations team
will be pleased to help if you want further information. If you should require a customised special solution, please contact us.
Ventilation and Control Precision Incubator Model IN160
- natural convection
- adjustment of pre-heated fresh air admixture by air flap control in 10% steps for each segment individually
- vent connection with restrictor flap
- adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
- self-diagnostics for fault analysis
- 1 Pt100 sensors Class A in 4-wire-circuit
- digital timer adjustable from 1 minute to 99 days, 23 hours
- parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
- SetpointWAIT function - the process time does not start until the set temperature is reached
- Setting of languages on ControlCOCKPIT: German/English/Spanish/French
- resolution of display for setpoint and actual temperature values 0.1°C
- calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
- programme stored in case of power failure
- incl. works calibration certificate for +37°C
Overtemperature Protection (double) Incubator Model IN160
- adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12 880 to switch off the heating approx. 20°C above nominal temperature
Textured Stainless Steel Casting Incubator Model IN160
- w x h x d: 745 x 1107 x 584 mm
- fully insulated stainless steel door with 2-point locking (compression door lock)
- inner glass door
- rear zinc-plated steel
Interior - Heating Concept Incubator Model IN160
- w x h x d: 560 x 720 x 400 mm, 161 l
- easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
- 2 stainless steel grids
- Max. loading of chamber: 210 kg
Temperature Range Incubator Model IN160
- min. 5°C above ambient up to +80 °C
Voltage / Power Rating Incubator Model IN160
- 230 V (+/- 10%), 50/60 Hz / approx. 1.600 W
- 115 V (+/- 10%), 50/60 Hz / approx. 1,100 W
Packing Data Incubator Model IN160
- net weight approx. 96 kg
- gross weight carton approx. 112 kg
- dimensions approx.:
carton w x h x d: 85 x 136 x 79 cm
- the appliances must be transported upright
Customer Tariff Number Incubator Model IN160
Country of Origin Incubator Model IN160
- Federal Republic of Germany
WEEE-Req.-No. Incubator Model IN160
ตู้เลี้ยงเชื้อ / ตู้เพาะเชื้อ / ตู้บ่มเชื้อ รุ่น IN160
ขนาดความจุ 161 ลิตร มีชั้นวาง 2 ชั้น อุณหภูมิสูงสุด 80 องศาเซลเซียส แบบไม่มีพัดลม
รายละเอียดทั้งหมด ตู้อบไฟฟ้าเอนกประสงค์ รุ่น IN160:
- ตู้ควบคุมอุณหภูมิ ชนิดใช้ไฟฟ้า สำหรับอบเพาะเชื้อ เลี้ยงเชื้อ
- ควบคุมการทำงานด้วย Microprocessor PID Temperature Controller
- สามารถวินิจฉัยได้ด้วยตัวเองกรณีที่การวิเคราะห์ผิดพลาด
- จอแสดงผลเป็น LED Digital display
- ตั้งอุณหภูมิได้สูงสุด 80 'C
- ตั้งเวลาการทำงานได้ 1 นาที ถึง 99 ขั่วโมง 59 นาที
- ภายในและภายนอกตู้ทำด้วยสแตนเลสสตีล
- ขนาดความจุประมาณ161 ลิตร
- ขนาดภายใน 56(กว้าง)x72(สูง)x40(ลึก) เซนติเมตร
- แบบไม่มีพัดลมภายในตู้
- มีชั้นวางของ จำนวน 2 ชั้น
- ใช้ไฟฟ้า 220 โวลท์ 50 เฮิร์ต
- ผลิตภัณฑ์จาก Memmert ประเทศเยอรมันนี
- รับประกันคุณภาพ 1 ปี
|
ตู้อบลมร้อนอุตสาหกรรม
ตู้อบลมร้อนระบบแก๊ส ตู้อบแห้ง มาตราฐาน

|
ตู้อบลมร้อนระบบแก๊ส มาตรฐาน มีคุณสมบัติในการอบชิ้นงาน เพื่อไล่ความชื้นออก สามารถเก็บรักษาวัตถุดิบไว้ได้นาน หรือเพื่อการแปรรูปผลผลิตต่าง ๆ พร้อมด้วยระบบควบคุมอุณหภูมิภายในตู้อบ บุด้วยฉนวนกันความร้อนอย่างดี ถาดแสตนเลสมีความแข็งแรงเป็นพิเศษ สามารถตั้งเวลาในการทำงานได้
|
ตู้อบลมร้อนระบบแก๊ส ตู้อบแห้ง อินฟราเรด

|
ตู้อบลมร้อนระบบแก๊ส อินฟราเรด มีคุณสมบัติในการอบชิ้นงาน เพื่อไล่ความชื้นออก สามารถเก็บรักษาวัตถุดิบไว้ได้นาน หรือเพื่อการแปรรูปผลผลิตต่าง ๆ พร้อมด้วยระบบควบคุมอุณหภูมิภายในตู้อบ บุด้วยฉนวนกันความร้อนอย่างดี ถาดแสตนเลสมีความแข็งแรงเป็นพิเศษ สามารถตั้งเวลาในการทำงานได้
|